background image

Station Features and Operation (DPT/SLT)

User Manual

273

Recording into the mailbox of another extension

Stopping recording

Conditions

A flexible CO and DSS button can be assigned as a Two-Way Record button or a Two-Way 
Transfer button.

Pressing the Two-Way Record button sends an alarm tone, if no idle voice mail port exists.

Pressing the Two-Way Transfer button followed by an extension number sends an alarm 
tone, if no idle voice mail port exists.

When you record Two-way telephone conversations, you should inform the other party that 
the conversation is being recorded.

Two-Way Recording into Phantom mailbox:

Allows you to record a conversation into the Phantom mailbox by entering the phantom 
extension number after pressing the Two-way Transfer button. The Phantom Message 
Waiting indicator light turns on. It will turn off after one of the phantom extension users 
listens to the recorded conversation.

User Manual References

2.2.2

Flexible Button Assignment

PT

Press Two-Way Transfer
(flexible button).

(Two-Way-Tran)

(DSS)

extension no.

Dial the extension number, the phantom extension number or
press DSS (flexible button) where you left a message notification.

or

During a conversation;

The Two-Way Transfer indicator light turns red.

phantom extension no.

or

PT

Press Two-Way Transfer(flexible button).

The Two-Way Transfer indicator light turns off.

(Two-Way-Tran)

Summary of Contents for KX-TD816





































































































































































































































































































































































































Reviews: