manualshive.com logo in svg

Panasonic KX-TD816, User Manual

Share
Download
Panasonic KX-TD816 User Manual Download Page 126

Station Features and Operation (DPT/SLT)

126

User Manual

4.3.15

Call Forwarding — CANCEL

There are two canceling methods for "Call Forwarding". The canceling method depends on the 
Call Forwarding type that is assigned.

Canceling Call Forwarding at your (original) extension

PT and SLT

7235 / 7436

<PT Display Example>

The FWD/DND indicator light turns off.

FWD/DND Cancel

FWD/DND

Lift the handset or
press SP-PHONE.

Hang up or press
SP-PHONE.

Press FWD/DND.

Press FWD/DND Cancel (F1).

Confirmation tone
and dial tone

F2

F1

F3

F4

F5

FWD/DND Cancel

For PT: Press FWD/DND.
For PT, SLT: Dial 710.

For PT, SLT

For PT

7

1

0

FWD/DND

Dial 0.

Lift the handset or press 
SP-PHONE/MONITOR.

Hang up or press 
SP-PHONE/MONITOR.

Confirmation 
tone and 
dial tone

0

<PT Display Example>

The FWD/DND indicator light turns off.

FWD/DND Cancel

You may press the flexible button
assigned as the FWD/DND button
instead.

Summary of Contents for KX-TD816





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands