Panasonic KX-TD612NE, Programming Manual

Page: 149 / 285

CO Line Programming
Programming Guide 149
[411] Host PBX Access Codes
Description
Assigns Host PBX access codes. If the system is installed behind a host PBX, an access code
is required to make an outside call. Up to 4 codes can be stored for a CO port.
Selection
• CO port number: 1 through 3
• Access code: 1 or 2 digits, 4 different entries (max.)
Default
All CO ports — Not Stored
Programming
1.
Enter 411.
Display : TRG Host PBX NO.
2.
Press NEXT.
Display: Port NO?
3.
Enter a CO port number.
To enter CO port number 1, you can also press NEXT.
Display example: #1 :
, , ,
4.
Enter an access code.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new access code.
Display example: #1 :01
, , ,
5.
To enter more access codes for the same CO port group, press and enter the access codes
until all the required entries are completed.
Display example: #1 :01,08,10,22
6.
Press STORE.
7.
To program another CO port, press NEXT or PREV, or SELECT and the desired CO port
number.
8.
Repeat steps 4 through 7.
9.
Press END.
Conditions
• This programme is only required if a host PBX is connected to the system.
• The access code has 1 or 2 digits, consisting of 0 through 9, and .