Station Features and Operation (PT/SLT)
User Manual
477
4.5.9
KX-T7235 Display Features - System Feature Access Menu
You can access various features using the messages which are displayed in alphabetical order.
To access the features, press the Feature (F4) button on the initial display first, search for the
desired feature message by pressing the NEXT (S3) button. Then press the Function button
which is next to the message. Additional parameters may be required. To access the features
while receiving a call (e.g., ringing), press the INTERCOM/DN button first. Then follow the
procedures on the following pages.
Features on the First Display
First Display
PREV
NEXT
MENU
Absent MSG Off
Absent MSG On (
→
1-9)
BSY Out Cancel (
→
PHY)
BSY Out Confirm (
→
PHY)
BSY Out Set (
→
PHY)
See the next page.
RING
BGM
CONT
Features
SYS Speed
Call Log
Absent Message
Capability
Shows your message on
the calling party's display.
On-hook.
Dial message
number (1 through 9).
Enter the parameters,
if required.
On-hook.
Cancel
Set
Trunk Busy-out
Setting
(operator/manager only)
Refer to the
corresponding feature
in Section 4.4,
"Operator / Manager
Service Features."
Summary of Contents for KX-TD500BX
