Panasonic KX-TD500, Programming Manual

Page: 265 / 392

Features
Programming Guide 265
Parameter Pause timing before sending DTMF signal (RBT, BT)
Default 1.5 s
Value Range 1.
0.5 s
2.
1.0 s
3.
1.5 s
4.
2.0 s
Description/Function Specifies the length of time in seconds the system is to wait before
sending Integration Code with DTMF signals (System- Voice
Mail, Extension Status).
Reference • 1.3 System Features (F/G)
– Integration, VPS
Parameter Turn off control of Message Waiting lamp
Default System
Value Range 1.
System
2.
Voice Mail
Description/Function Specifies whether the system or the Voice Mail port turns off the
Message Waiting lamp after the extension user retrieved a message
recorded in his mailbox.
Reference • 1.3 System Features (F/G)
– Integration, VPS
• 1.17 Display Features (F/G)
– Message Waiting
Parameter Start AA service after FWD, IRNA of CO call
Default Do not start
Value Range 1.
Do not start
2.
Start
Description/Function Specifies whether the system starts the AA (Automated Attendant)
Service or not when a CO call is directed to Voice Mail port by Call
Forwarding or Intercept Routing.
If "Start" is specified, "AA Service Code" is transmitted to the VM
port and the VM service does not work.
Reference • 1.3 System Features (F/G)
– Integration, VPS