Panasonic KX-TD500, Features Manual

Page: 339 / 398

General Features
Features Guide 339
Display, Call Information
Description
The display PT shows the extension user the following call information:
Extension number and name
These are shown when calling or called by an extension user and during an established
intercom call.
A display example:
123: Tony Viola
Dialed telephone number
This is shown when dialing the telephone number.
A display example: 1234567890
Number or name of the caller
These are shown if the Caller ID feature is available.
Display examples:
10101: 1234567890
10101: Panasonic
CO Line number and name
This is shown when receiving a CO call.
A display example:
10101: AB COMPANY
DID/DID(ISDN) number and name
These are shown when receiving a DID/DID(ISDN) call.
Display examples:
DID: Tony Viola (When "Name" is registered.)
10101: CO001 (When "Name" is not registered.)
Call duration of outside call
This is shown during an established CO call. The display remains for 5 seconds after the
call is finished.
A display example:
10101 0 : 02'28
Doorphone No.
This is shown when receiving or making a doorphone call.
A display example:
Doorphone 1
Conditions
• Extension numbers and names are programmable. If no extension name is stored, only the
extension number is displayed.
• Intercom Call Duration is not shown on the display.
• The outgoing CO call duration count starts when a specified time expires.
• Caller ID Service
Depending on a type of the CO line, Caller ID Service can be classified as follows:
1)
Analog CO line - Caller ID Service
2)
ISDN CO line - CLIP (Calling Line Identification Presentation) Service