manualshive.com logo in svg

Panasonic KX-TD1232NE, Programming Manual, Page: 86 / 352

Share
Download
Panasonic KX-TD1232NE Programming Manual Download Page 86

2.2

System Programming 

86

General Programming 

[111]

ISDN DDI / MSN Removed Digit / Added Number 

Assignment

Description

Assigns the removed digits and added number to a subscriber's number and the DDI number 
sent from the network to make an extension number which receives the call.

Selection

•

CO line number:
KX-TD816 – 01 through 08, 
KX-TD1232 – 01 through 24, 
( =all CO lines)

•

Removed digit:
0 through 16 (0=no deletion)

•

Added number:
4 digits (max.)

Default

All CO Lines – 0 (removed digit), Not stored (added number)

Programming

1.

Enter 111.

Display: DDI Removed / Add

2.

Press NEXT.

Display: CO Line NO?

3.

Enter the CO line number.

4.

Enter the digit(s) to be deleted.

To change the current entry, press CLEAR and the new number.

5.

Press .

Display example: CO01:3,

6.

Enter the number(s) to be added.

To change the current entry, press CLEAR and the new number.

7.

Press STORE.

8.

Press END.

Summary of Contents for KX-TD1232NE

































































































































































































































































































































































Reviews:

No comments