manualshive.com logo in svg

Panasonic KX-TD1232NE, Programming Manual, Page: 77 / 352

Share
Download
Panasonic KX-TD1232NE Programming Manual Download Page 77

2.2

System Programming

General Programming 

77

[105]

Account Codes

Description

Assigns the account codes for Account Code Entry, Verified – All Calls and Verified – Toll 
Restriction Override modes. If Verified – All Calls is assigned in programme [508]

Account 

Code Entry Mode, an account code is required to make an outside call. If Verified – Toll 
Restriction Override is assigned, an account code is only required for a toll call and overrides 
toll restriction.

Selection

•

Location number: 001 through 128

•

Account code: 10 digits (max.)

Default

All locations – Not Stored

Programming

1.

Enter 105.

Display: Account Code

2.

Press NEXT.

Display: Location No?

3.

Enter a location number.

To enter location number 001, you can also press NEXT.

Display example: 001:Not Stored

4.

Enter an account code.

To delete the current entry, press CLEAR.

To change the current entry, press CLEAR and the new account code.

5.

Press STORE.

6.

To programme another location, press NEXT or PREV, or SELECT and the desired 
location number.

7.

Repeat steps 4 through 6.

8.

Press END.

Conditions

•

There is a maximum of 128 verifiable account codes. Each code has a maximum of 10 
digits, consisting of 0 through 9.

•

Programme [508]

Account Code Entry Mode is used to select the Account Code Entry 

mode.

Summary of Contents for KX-TD1232NE

































































































































































































































































































































































Reviews:

No comments