manualshive.com logo in svg

Panasonic KX-TD1232NE, Programming Manual, Page: 73 / 352

Share
Download
Panasonic KX-TD1232NE Programming Manual Download Page 73

2.2

System Programming

General Programming 

73

[102]

Day / Night Service Starting Time

Description

Sets the starting time on a day of the week basis, when automatic day / night switching is 
selected.

Selection

•

Day of the week selection number:
1 (Sunday) / 2 (Monday) / 3 (Tuesday) / 4 (Wednesday) /
5 (Thursday) / 6 (Friday) / 7 (Saturday) /  (every day of the week)

•

Hour: 0 through 23 / Disable (no switching)

•

Minute: 0 through 59

Default

Every day of the week – Day – 9:00 / Night – 17:00

Programming

1.

Enter 102.

Display: Day / Night Time

2.

Press NEXT.

Display: Day of Week?->

3.

Enter the day of the week selection number.

To select Sunday, you can also press NEXT.

Display example: Sun-Day: 9:00

To select night mode, press NEXT one more time.

Display example: Sun-Night: 17:00

4.

Enter the hour.

To set no switching, keep pressing SELECT until "Disable" is displayed and go to step 
7.
If SELECT is pressed, the display shows the previous entry. If the previous setting was 
"Disable," press SELECT to enter the starting time.
To change the current entry, press CLEAR and the new time.

5.

Press .

6.

Enter the minute.

To change the current entry, press CLEAR and the new minutes.

7.

Press STORE.

8.

To programme another day / night mode or day of the week, press NEXT or PREV, or 
SELECT and the day of the week selection number.

9.

Repeat steps 4 through 10.

Summary of Contents for KX-TD1232NE

































































































































































































































































































































































Reviews:

No comments