manualshive.com logo in svg

Panasonic KX-TD1232NE, Programming Manual, Page: 41 / 352

Share
Download
Panasonic KX-TD1232NE Programming Manual Download Page 41

2.1

Manager Programming

General Programming 

41

[006]

Operator / Manager Extension Assignment — Day / Night

Description

Assigns the jack number for a manager and / or operators. The manager extension can perform 
System Programming. An operator has the ability to perform operator services.

Selection

•

OPE-1(operator 1) (Day / Night) / OPE-2 (operator 2) (Day / Night)/ MNGER (manager)

•

Jack number: 
KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64 

Default

Operator 1 (Day / Night) – Jack 01

Operator 2 – Not Stored

Manager – Jack 01

Programming

1.

Enter 006.

Display: Operator/Manager

2.

Press NEXT to programme Operator 1 in Day mode.

Display: OPE-1- Day:Jack01

To program another item, you can also keep pressing NEXT or PREV until the desired 
one is displayed.

3.

Enter a jack number.

To delete the current entry, press CLEAR.

To change the current entry, press CLEAR and the new jack number.

4.

Press STORE.

5.

To programme another item, press NEXT or PREV.

6.

Repeat steps 3 through 5.

7.

Press END.

Conditions

•

Up to two operators and a manager can be programmed.

•

In case of the KX-TD1232, Jack numbers 01 through 32 are for the Master System and 33 
through 64 are for the Slave, if available.

•

The manager cannot be assigned the jack number of the Console Port set in programme 
[007]

Console Port and Paired Telephone Assignment.

Summary of Contents for KX-TD1232NE

































































































































































































































































































































































Reviews:

No comments