Panasonic KX-TD1232NE, Programming Manual, Page: 36 / 352

2.1 Manager Programming
36 General Programming
[004] Extension Name Set
Description
Assigns names to the extension numbers programmed in program [003] Extension Number
Set.
Selection
• Jack number:
KX-TD816 – 01 through 16 (-1 / -2)
KX-TD1232 – 01 through 64 (-1 / -2)
(-1 = first part, -2 = second part)
• Name:
10 characters (max.)
Default
All jacks – Not Stored
Programming
1.
Enter 004
Display: EXT Name Set
2.
Press NEXT.
Display: Jack No?->
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack number.
Display: #01-1:Not Stored
4.
Enter a name.
For entering characters, see Section 1.4 Entering Characters.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new name.
5.
Press STORE.
6.
To programme another jack, press NEXT or PREV, or SELECT and the desired jack
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• There is a maximum of 32 names for KX-TD816 and 128 names for KX-TD1232. Each
name has a maximum of 10 characters.