manualshive.com logo in svg

Panasonic KX-TD1232NE, Programming Manual, Page: 321 / 352

Share
Download
Panasonic KX-TD1232NE Programming Manual Download Page 321

3.1

DECT Programming

DECT Programming

321

[665]

PS Voice Mail Access Codes

Description

Assigns a mailbox number for each PS only if programme [990]

System Additional 

Information, Field (18) , is set to "free".

Selection

•

PS registration number: 

KX-TD816 – 01 through 16
KX-TD1232 – 01 through 64

•

Mailbox number: 16 digits (max.)

Default

All PSs – Not stored

Programming

1.

Enter 665.

Display: PS VM ID Code

2.

Press NEXT.

Display: PS NO?

3.

Enter the PS registration number.

You can also keep pressing NEXT until the desired PS registration number is displayed.

Display example: PS01:Not Stored

4.

Enter the mailbox number.

To delete the current entry, press CLEAR.

To change the current entry, press CLEAR and enter the new number.

5.

Press STORE.

6.

To programme another PS, press NEXT or PREV, or SELECT and the desired PS 
registration number.

7.

Repeat steps 4 through 6.

8.

Press END.

Conditions

•

The system supports a maximum of eight jacks (16 jacks during System Connection) for 
connection to a Voice Processing System as the Voice Mail or Automated Attendant ports.

•

Each mailbox number has a maximum of 16 digits, consisting of 0 through 9,   , # and 
PAUSE.

Summary of Contents for KX-TD1232NE

































































































































































































































































































































































Reviews:

No comments