Panasonic KX-TD1232NE, Programming Manual, Page: 30 / 352

2.1 Manager Programming
30 General Programming
[001] System Speed Dialling Number Set
Description
Used to programme the System Speed Dial numbers. These numbers are available to all
extension users. The stored numbers are also applied to Caller ID and Call Log, Incoming
Features.
Selection
• Speed dial number: 000 through 499
• Telephone number: 24 digits (max.)
Default
All speed dial numbers – Not Stored.
Programming
1.
Enter 001.
Display: SPD Number Set.
2.
Press NEXT.
Display: SPD Code?->
3.
Enter a speed dial number.
To enter speed dial number 000, you can also press NEXT.
Display example: 000: Not Stored.
4.
Enter a telephone number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new number.
5.
Press STORE.
6.
To programme another speed dial number, press NEXT or PREV, or SELECT and the
desired speed dial number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• There is a maximum of 500 speed dial numbers. Each speed dial number has a maximum
of 24 digits. The valid characters are 0 through 9, , and # keys, RECALL, PAUSE,
SECRET and — (hyphen) buttons.
– To store a flash or earth signal, press RECALL.
– To store a hyphen, press the "–" button.
– To store a pause, press PAUSE.
(Refer to Section 3 "Pause Insertion, Automatic.")