manualshive.com logo in svg

Panasonic KX-TD1232NE, Programming Manual, Page: 28 / 352

Share
Download
Panasonic KX-TD1232NE Programming Manual Download Page 28

2.1

Manager Programming

28

General Programming 

2.1

Manager Programming

[000]

Date and Time Set

NOTICE

It is assumed that you have read Section 1.1

General Programming Instructions. The use of 

the soft buttons is discussed in the section, therefore we will not make any reference to them 
in the following instructions. At any time the soft buttons can be used in place of the overlay 
keys.

Description

Sets the current date and time.

Selection

•

Day: 1 through 31

•

Month: Jan through Dec

•

Year: 00 through 99

•

Day of the week: SUN / MON / TUE / WED / THU / FRI / SAT

•

Hour: 00 through 23

•

Minute: 00 through 59

Default

1 Jan '94 SAT 00:00

Programming

1.

Enter 000.

Display: Day/Time Set

2.

Press NEXT.

Display example: 1 Jan '94 SAT

 

3.

Enter the day.

To change the current entry, press CLEAR and enter the new day.

4.

Press .

5.

Keep pressing SELECT until the desired month is displayed.

6.

Press .

7.

Enter the year.

To change the current entry, press CLEAR and the new year.

8.

Press .

9.

Keep pressing SELECT until the desired day of the week is displayed.

Summary of Contents for KX-TD1232NE

































































































































































































































































































































































Reviews:

No comments