manualshive.com logo in svg

Panasonic KX-TD1232NE, Programming Manual, Page: 244 / 352

Share
Download
Panasonic KX-TD1232NE Programming Manual Download Page 244

2.7

Extension Programming

244

General Programming 

[612]

Data Line Security

Description

Sets or cancels the Data Line Security mode on an extension basis.

Selection

•

Jack number:
KX-TD816 – 01 through 16,   (-1 / -2),
KX-TD1232 – 01 through 64,   (-1 / -2),
( =all jacks, -1 = first part, -2 = second part)

•

On / Off

Default

All jacks – Off

Programming

1.

Enter 612.

Display: Data Mode

2.

Press NEXT.

Display: Jack NO ?

3.

Enter a jack number.

To enter jack number 01, you can also press NEXT.

To select the second part (-2), press NEXT after entering a jack number.

Display example: #01-1: Off

4.

Keep pressing SELECT until the desired selection is displayed.

5.

Press STORE.

6.

To programme another jack, press NEXT or PREV, or SELECT and the desired jack 
number.

7.

Repeat steps 4 through 6.

8.

Press END.

Conditions

•

In case of the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 
through 64 are for the Slave, if available.

•

For an explanation of jack numbering, see "Rotation of jack number" in Section 
1.3

Programming Ways.

•

To assign all jacks to one selection, press the   key in step 3. In this case, the display shows 
the contents programmed for Jack 01.

Summary of Contents for KX-TD1232NE

































































































































































































































































































































































Reviews:

No comments