manualshive.com logo in svg

Panasonic KX-TD1232NE, Programming Manual, Page: 236 / 352

Share
Download
Panasonic KX-TD1232NE Programming Manual Download Page 236

2.7

Extension Programming

236

General Programming 

[607-608]

Doorphone Ringing Assignment — Day / Night

Description

These programmes assign the extensions which will ring when a doorphone call is received 
during the day and night modes.

Selection

•

Jack number:
KX-TD816 – 01 through 16,  (-1 / -2)
KX-TD1232 – 01 through 64,  (-1 / -2)
( =all jacks, -1 = first part, -2 = second part)

•

Doorphone number:
KX-TD816 – 1, Disable,
KX-TD1232 – 1 or 2, Disable,
two entries (max.)

Default

Jack 01–1– 12; Other jacks – Disable (no doorphone) — Day / Night

Programming

1.

Enter a program address (607 for day or 608 for night).

Display example: Doorphone in Day

2.

Press NEXT.

Display: Jack NO ?

3.

Enter a jack number.

To enter jack number 01, you can also press NEXT.

To select the second part (-2), press NEXT after entering a jack number.

Display example: #01-1:12

4.

Enter the doorphone numbers.

To assign no doorphone, press CLEAR.

To change the current entry, press CLEAR and the new doorphone numbers.

5.

Press STORE.

6.

To programme another jack, press NEXT or PREV, or SELECT and the desired jack 
number.

7.

Repeat steps 4 through 6.

8.

Press END.

Summary of Contents for KX-TD1232NE

































































































































































































































































































































































Reviews:

No comments