Panasonic KX-TD1232NE, Programming Manual, Page: 161 / 352

2.5 CO Line Programming
General Programming 161
[409-410] Intercept Extension — Day / Night
Description
Intercept Routing provides an automatic re-direction of calls which cannot or have not been
answered. These programmes set the destination in both day and night modes for each line
group.
Selection
• CO line group (TRG) number: 1 through 8, ( =all CO line groups)
• Extension number: 2 through 4 digits / Disable. (no Intercept Routing)
Default
All CO line groups – Disable. — Day / Night
Programming
1.
Enter a program address (409 for day or 410 for night).
Display example: TRG Intercpt Day
2.
Press NEXT.
Display: TRK GRP NO.?
3.
Enter the CO line group number.
To enter CO line number 1, you can also press NEXT.
Display example: Bnd1:Disable.
4.
Enter an extension number.
To change the current entry, press CLEAR and the new number.
To disable Intercept Routing, press CLEAR.
5.
Press STORE.
6.
To programme another CO line group, press NEXT or PREV, or SELECT and the desired
CO line group number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• You set the extension numbers in programmes, [003] Extension Number Set,
[012] ISDN Extension Number Set, [127] Voice Mail Extension Number Assignment,
[130] Phantom Extension Number Assignment, or floating numbers of external ringer,
UCD and pagers, in programme [813] Floating Number Assignment.
• To assign all CO line groups to one selection, press the key at step 3. In this case, the
display shows the contents programmed for CO line group 1.