Panasonic KX-TD1232JT, Programming Manual

Page: 275 / 402

3.4 Extension Programming
ISDN Programming 275
[617] CLIP / COLP Number Assignment for Extension
Description
Assigns a CLIP/COLP number for each extension.
Selection
• Jack number:
KX-TD816 – 01 through 16, (-1 / -2)
KX-TD1232 – 01 through 64, (-1 / -2)
( =all jacks, -1 = first part, -2 = second part)
• CLIP/COLP number: 16 digits (max.)
Default
All jacks – Not stored
Programming
1.
Enter 617.
Display: CLIP for EXT
2.
Press NEXT.
Display: Jack NO?
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering the jack number.
Display example: #01-1:Not Stored
4.
Enter a CLIP/COLP number.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To programme another jack, press NEXT or PREV, or SELECT and the desired jack
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• Each CLIP/COLP number consists of 0 through 9.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available.
• To assign all jacks to one selection, press the key in step 3. In this case, the display shows
the contents programme for jack 01.