Panasonic KX-TD1232JT, Programming Manual

Page: 244 / 402

3.3 ISDN Line Programming
244 ISDN Programming
[419] ISDN Outgoing CLIR Service Assignment
Description
Assigns whether ISDN CLIR (Calling Line Identification Restriction) service is enabled or
disabled for outgoing outside calls. If disabled, the subscriber's number of your system is
informed to the called party.
Selection
• Outside line (CO) number:
KX-TD816 – 01 through 08,
KX-TD1232 – 01 through 24,
( =all outside lines)
• Enable / Disable
Default
All outside lines – Enable
Programming
1.
Enter 419.
Display: ISDN CLIR Send
2.
Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter outside line number 01, you can also press NEXT.
Display example: CO01:Enable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, outside lines 01 through 12 are for the Master System and outside
lines 13 through 24 are for the Slave, if available.
• To assign all outside lines to one selection, press the key in step 3. In this case, the display
shows the contents programmed for outside line 01.
• Programme [418] ISDN Line Number Assignment is used to store the subscriber's
number of your system that is informed to the called party.