Panasonic KX-TD1232JT, Programming Manual

Page: 156 / 402

2.5 Outside Line Programming
156 General Programming
[423] Pay Tone Assignment
Description
Enables Pay Tone for the outside lines.
An optional Pay Tone Card (KX-TD189) must be installed on the CO Line Card to receive a
Pay Tone.
Selection
• Outside line (CO) number:
KX-TD816 – 01 through 08,
KX-TD1232 – 01 through 24,
( =all outside lines)
• Enable / Disable
Default
All outside lines – Disable
Programming
1.
Enter 423.
Display: Pay-Tone Asn
2.
Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter outside line number 01, you can also press NEXT.
Display example: CO01:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, outside lines 01 through 12 are for the Master System and outside
lines 13 through 24 are for the Slave.
• To assign all outside lines to one selection, press the key in step 3. In this case, the display
shows the contents programmed for outside line 01.
• It is not necessary to install the Pay Tone Card on the ISDN Line Unit.