Panasonic KX-TD1232E, Installation Manual

Page: 389 / 713

System Programming 4-69.10
4.3 System Programming
ISDN DDI Translation Table
150
Description
Assigns a destination location of incoming DDI numbers.
Incoming DDI numbers are received at extensions assigned to each
location number.
Selection
• Location number: 000 through 399
• DDI number: 16 digits max.
Default
All locations – Not Stored
Programming
1. Enter 150.
Display: DDI Assign
2. Press NEXT.
Display: Location NO?
→
3. Enter a location number.
To enter location number 000, you can also press NEXT.
Display example: 000:Not Stored
4. Enter a DDI number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5. Press STORE.
6. To program another location, press NEXT or PREV, or
SELECT and the desired location number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• The DDI number can be a maximum of 16 digits. Valid numbers are
from 0 to 9.
• Programs [151]–[152] “ISDN DDI Ringing Assignment — Day /
Night” are used to assign an extension to each location number in the
day and night modes.
• This program becomes available when “DDI” is selected in program
[420]/[429] “ISDN Ring Service Assignment — Day / Night.”
Feature References
Section 3, Features,
Direct Dialling In (DDI)
Integrated Services Digital Network (ISDN)