Panasonic KX-TD1232C User Manual Download Page 128

Page: 128 / 384

Station Features and Operation (DPT/SLT)

128

User Manual

4.3.15

Call Forwarding — CANCEL

There are two canceling methods for "Call Forwarding". The canceling method depends on the
Call Forwarding type that is assigned.

Canceling Call Forwarding at your (original) extension

PT and SLT

7235 / 7436

<PT Display Example>

The FWD/DND indicator light turns off.

FWD/DND Cancel

FWD/DND

Lift the handset or
press SP-PHONE.

Hang up or press
SP-PHONE.

Press FWD/DND.

Press FWD/DND Cancel (F1).

Confirmation tone
and dial tone

FWD/DND Cancel

For PT: Press FWD/DND.
For PT, SLT: Dial 710.

For PT, SLT

For PT

FWD/DND

Dial 0.

Lift the handset or press
SP-PHONE/MONITOR.

Hang up or press
SP-PHONE/MONITOR.

Confirmation
tone and
dial tone

<PT Display Example>

The FWD/DND indicator light turns off.

FWD/DND Cancel

You may press the flexible button
assigned as the FWD/DND button
instead.

Summary of Contents for KX-TD1232C

































































































































































































































































































































































































Search results

Summary of Contents for KX-TD1232C

Reviews:

Related manuals for KX-TD1232C

Brands by name

Popular brands

Panasonic KX-TD1232C, User Manual

Search results

Summary of Contents for KX-TD1232C

Reviews:

Related manuals for KX-TD1232C

Brands by name

Popular brands