manualshive.com logo in svg

Panasonic KX-TD1232C, User Manual

The Panasonic KX-TD1232C is a robust and reliable business communication system, designed to enhance productivity and connectivity within your organization. To make the most of its features, ensure you have the User Manual at hand. Download this indispensable manual for free from our website to optimize your user experience.

Share
Download
background image

Station Features and Operation (DPT/SLT)

User Manual

113

4.3.6

Background Music (BGM) [PT only]

You can hear background music through the built-in speaker of your PT. An external music 
source, such as a radio, must be connected. The music stops whenever a call comes in or when 
you go off-hook.

Setting / Canceling

Conditions

•

Turning on/off
You can turn on/off the BGM only when your PT is not in use.

Programming Guide References

[803] Music Source Use

[990] System Additional Information

PT

7230 / 7235 / 7433 / 7436

Dial 1.

When the handset is on the cradle and the SP-PHONE/MONITOR button is off;

1

The display shows either one of the following for five seconds
depending on whether BGM is on or off:
<PT Display Example>

or

BGM Off

BGM On

BGM

S1

S2

S3

Press BGM (S3).

To turn off the BGM, 
press this button again.

When the handset is on the cradle and the SP-PHONE button is off;

Summary of Contents for KX-TD1232C

































































































































































































































































































































































































Reviews:

No comments

Related manuals for KX-TD1232C

Panasonic KX-TEA308 Getting Started preview
KX-TEA308
Brand: Panasonic Pages: 36

Brands by name

Popular brands

Load more brands