Panasonic KX- TAW848 Features Manual Download Page 104

Page: 104 / 584

1.15 Optional Device Features

104

Feature Guide

User Manual References

1.3.4 Trunk Answer From Any Station (TAFAS)

1.15.4 Background Music (BGM)

Description

A proprietary telephone (PT) user can listen to background music (BGM) through the built-in speaker while
on-hook and idle.

BGM—External

BGM can also be broadcast in the office through an external pager (loudspeaker) and can be turned on and
off by an extension assigned as a manager.

Conditions

[BGM]

•

Hardware requirement:

A user-supplied external audio source, such as a CD player or radio.

•

The music heard through the PT is interrupted when going off-hook.

[BGM—External]

•

Hardware requirement:

A user-supplied external pager

•

The external pager can be used with the following priorities:
Trunk Answer From Any Station (TAFAS)

→

Paging

→

BGM

(

→

1.14.1 Paging,

→

1.15.3 Trunk Answer From Any Station (TAFAS))

Installation Manual References

2.9.1 Connection of Peripherals

User Manual References

1.7.5 Background Music (BGM)

2.1.4 External Background Music (BGM)

1.15.5 Outgoing Message (OGM)

Description

An extension assigned as a manager (manager extension) can record outgoing messages (OGMs) for the
following features:

Feature

Usage

Details in

Direct Inward System
Access (DISA)

When a call arrives on a DISA line, the caller will hear a
message.

• 1.15.6 Direct
Inward System
Access (DISA)

Summary of Contents for KX- TAW848









































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX- TAW848

Reviews:

Related manuals for KX- TAW848

Brands by name

Popular brands

Panasonic KX- TAW848, Features Manual

Search results

Summary of Contents for KX- TAW848

Reviews:

Related manuals for KX- TAW848

Brands by name

Popular brands