3.2 Connection
76
Installation Manual
3.2.3
Accessing PBX via Internal Modem
When the mode of the PBX outside (CO) line that will be accessed is 'MODEM':
1.
For Dial Number, enter the telephone number assigned to the internal modem of the PBX.
2.
Select
Auto (Tone)
or
Auto (Pulse)
for Dial Type.
3.
Click
OK
.
4.
Click
OK
. The PC will connect to the PBX.
When the mode of the PBX outside (CO) line that will be accessed is 'DISA':
1.
For Dial Number, enter the telephone number assigned to the internal modem of the PBX,
several pause symbols (',') and the Remote Maintenance feature number (for example:
01234567,,,,,729).
2.
Select
Auto (Tone)
for Dial Type.
3.
Click
OK
.
4.
Click
OK
. The PC will connect to the PBX.
Notes
•
The number of pause symbols to be inserted differs depending on the PC modem used.
•
Auto (Pulse) Dial Type cannot be used.
When the mode of the PBX outside (CO) line that will be accessed is 'Normal':
1.
For Dial Number, enter the pause symbol (',').
2.
Select
Manual
for Dial Type.
3.
Click
Initialize
.
4.
Click
OK
.
5.
Click
OK
.
6.
Dial the telephone number assigned to the outside (CO) line from a telephone connected in
parallel with the PC.
1.
Start the KX-TA Maintenance Console software
from the start menu on your PC. (
Start
→
Programs
→
KX-TA Maintenance Console
)
2.
Type the Installer Level Programmer Code that was
set during the KX-TA Maintenance Console
installation.
3.
Click the check box to connect to the PBX. Options
will appear as shown here, on the left.
4.
Type the System Password. (default: 1234)
5.
Select
Modem
, and click
Setup
.
Summary of Contents for KX-TA82492 - Voice Message Expansion Card
Page 12: ...12 Installation Manual ...
Page 78: ...3 2 Connection 78 Installation Manual ...
Page 85: ...Installation Manual 85 Index ...
