Panasonic KX-TA824 Page 71 Installation Manual Download

Page: 71 / 88

3.1 Installing KX-TA Maintenance Console

Installation Manual

Installing KX-TA Maintenance Console

Notes

•

Before installing or uninstalling the software, be sure to close any open applications.

•

To install or uninstall the software on a PC running Windows 2000 Professional or Windows
XP Professional, you must be logged in as a user in the "Administrators" group.

Programming Manual References

3.2 PC Programming

Feature Manual References

1.1.99 PC Programming

Insert the included CD-ROM into the CD-ROM drive of your PC.

The main screen will appear automatically.

Click

Maintenance Console

Double-click the setup file to run the installer. (Its icon is shown here, on the left.)

Follow the on-screen instructions provided by the installation wizard.

Summary of Contents for KX-TA824

























































































Search results

Summary of Contents for KX-TA824

Reviews:

Related manuals for KX-TA824

Brands by name

Popular brands

Panasonic KX-TA824, Installation Manual

Search results

Summary of Contents for KX-TA824

Reviews:

Related manuals for KX-TA824

Brands by name

Popular brands