Panasonic KX-TA824 Page 70 Installation Manual Download | Manualshive

Page: 70 / 88

background image

3.1 Installing KX-TA Maintenance Console

70

Installation Manual

3.1

Installing KX-TA Maintenance Console

3.1.1

Installing KX-TA Maintenance Console on a PC

System Requirements

Operating System

•

Microsoft® Windows® 98 SE, Windows Me, Windows 2000, or Windows XP

Hardware

•

CPU: 300 MHz Intel® Celeron® or faster

•

RAM: At least 128 megabytes (MB) of available RAM

•

Hard disk space: At least 100 MB of space for the installation, and approximately 2 MB of
additional space for user files.

Setting the Password and Password Security

To maintain system security, a password is required to perform system programming. When KX-TA
Maintenance Console is started for the first time, the Quick Setup utility will ask you to set the system
password. To avoid unauthorized access and possible fraudulent dialing, do not disclose the
password.

Warning to the Installer regarding the system password

1.

Please inform the customer of the importance of the password and the possible dangers if
it becomes known to others.

2.

To avoid unauthorized access and possible fraudulent dialing, maintain the secrecy of the
password.

3.

We strongly recommend that you change the default password value to something else for
reasons of system security. It is best to use a password of 7 digits.

4.

Please change the password periodically.

5.

If a system password is forgotten, it can be found by loading a backup of the system data
into a PC, and checking the password using the KX-TA Maintenance Console software. If
you do not have a backup of the system data, you must reset the PBX to its factory defaults
and reprogram it. Therefore, we strongly recommend maintaining a backup of the system
data.

For more information on how to back up the system data, refer to the on-line help that
appears by selecting the Help menu during PC programming. However, as system
passwords can be extracted from backup copies of the system data file, do not allow
unauthorized access to these files.

Note

This PBX has only one system password. It can be changed by either PT programming or PC
programming. For this reason, the password can consist of numerals only.

«
...
68
69
70
71
72
...
»

Summary of Contents for KX-TA824

























































































Reviews:

No comments

Related manuals for KX-TA824

Univerge SV8100

Brand: NEC Pages: 1174

Brand: Hama Pages: 22

Brand: Uniden Pages: 68

Brand: Panasonic Pages: 10

Brand: Uniden Pages: 68

Brand: AT&T Pages: 66

DESKMASTER 510i

Brand: Topcom Pages: 38

Brand: Q-Light Pages: 2

Brand: VTech Pages: 2

Brand: OGATECH Pages: 144

Brand: Aastra Pages: 9

Brand: Festool Pages: 132

Brand: switel Pages: 68

Brand: Uniden Pages: 28

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 15

KX-TS401W - Speakerphone

Brand: Panasonic Pages: 32

Brand: Panasonic Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands