Panasonic KX-TA824 Feature Manual Download

Page: 49 / 178

1.1 General Features

Feature Manual

1.1.33 Conference

Description

During a 2-party conversation, an extension user can add a third party to the conversation, thereby
establishing a 3-party conference call.

Conditions

•

Conference call arrangement

The following configurations of 3-party conference calls are possible:

–

One extension and 2 outside parties

–

2 extensions and one outside party

–

3 extensions

•

Conference Button

On a proprietary telephone (PT) that does not have a CONF (Conference) button, a flexible CO button
can be customized as a Conference button.

•

Consultation Hold

When an extension user tries to establish a conference call, the current call is automatically placed on
consultation hold until the conference is established (

1.1.36 Consultation Hold).

•

A confirmation tone will be sent to all parties when a 2-party conference call is changed to a 3-party
conference call. It is possible to eliminate the tone through system programming (

[105] Conference

Tone).

•

A 3-party conference call can also be established by Executive Busy Override.

Programming Manual References

[PT Programming]

[104] SLT Hold Mode

[105] Conference Tone

[PC Programming]

9.1.11 Detail [1-10]—Single Line Telephone—Hold Mode, Conference—Conference Tone

Feature Manual References

1.1.34 Conference, Unattended

1.1.36 Consultation Hold

1.1.59 Fixed Buttons

1.1.61 Flexible Buttons

Operating Manual References

1.3.31 Conference

3.1.3 Flexible Button Assignment—Conference button

Summary of Contents for KX-TA824



















































































































































































Search results

Summary of Contents for KX-TA824

Reviews:

Related manuals for KX-TA824

Brands by name

Popular brands

Panasonic KX-TA824, Feature Manual

Search results

Summary of Contents for KX-TA824

Reviews:

Related manuals for KX-TA824

Brands by name

Popular brands