background image

1.1 General Features

132

Feature Manual

DTMF mode cannot be changed to Pulse mode.

Programming Manual References

[PT Programming]

[119] Redialing after Pulse to Tone Conversion

[401] Dial Mode

[PC Programming]

9.1.11 Detail [1-10]—CO—Redialing after Pulse to Tone Conversion

9.3.3 Detail [3-3]—Dial Mode

Feature Manual References

1.1.39 Dial Type Selection

Operating Manual References

1.3.77 Pulse to Tone Conversion

1.1.105 Redial, Last Number

Description

Every extension automatically saves the last external telephone number dialed, allowing the same number 
to be easily redialed.

Conditions

Up to 64 digits plus the Outside (CO) Line Access number can be stored and redialed.

The stored telephone number is replaced whenever a new number is dialed.

Operating Manual References

1.3.78 Redial, Last Number

1.1.106 Redial, Saved Number

Description

A proprietary telephone (PT) user can save a telephone number while in a conversation with an outside 
party or while hearing a busy tone, and then easily redial the number later. The saved number is kept until 
a new number is stored.

Conditions

Up to 64 digits plus the Outside (CO) Line Access number can be stored and redialed.

Summary of Contents for KX-TA824



















































































































































































Reviews: