Panasonic KX-TA824, Feature Manual

Page: 106 / 178

1.1 General Features
106 Feature Manual
Conditions
• LCS/LCS Cancel Button
A flexible CO/DSS button can be customized as an LCS or LCS Cancel button.
• To prevent the unauthorized screening of calls, a 3-digit password must be entered when activating LCS
for an extension. If the user forgets his or her password, it can be cleared by the operator or manager
(LCS Password Control).
• If an extension user is screening a call and then goes off-hook to answer it, the VPS will either stop or
continue recording the message, according to system programming (
[620] LCS Recording Mode
Set).
• If a call arrives while an extension user is having a conversation with another party and the extension
has Call Waiting activated, the user will hear a call waiting tone. The user can put the existing call on
hold before accessing LCS.
Programming Manual References
[PT Programming]
[620] LCS Recording Mode Set
[PC Programming]
9.2.1 Main [2-1]—LCS Recording Mode
9.2.2 Feature settings [2-2]—LCS Password
9.2.3 PT personal settings [2-3]—LCS Mode
Feature Manual References
1.1.61 Flexible Buttons
1.1.120 Voice Mail APT Integration
Operating Manual References
1.3.56 Live Call Screening (LCS) (Voice Mail APT Integration only)
2.1.7 System Feature Assignment—LCS Password Control
3.1.2 Personal Feature Assignment—LCS Mode Set
3.1.3 Flexible Button Assignment—LCS or LCS Cancel button
1.1.78 Local Carrier-based Voice Mail Service
Description
The PBX supports voice mail service, which is an answering system offered by the telephone company, to
notify the called party of a message waiting. After subscription, the voice mail system can answer calls
automatically instead of the PBX when the line is busy or calls are not answered, and callers can leave their
messages in a mailbox provided by the telephone company.
The Message/Ringer Lamp lights red and the corresponding Single-CO (S-CO) button flashes red at
moderate speed when a message has been recorded and stored in the mailbox of the telephone company.
Going off-hook, pressing the red flashing S-CO button and then pressing the MESSAGE button allows a
proprietary telephone (PT) user to access the voice mail system and listen to the messages stored in the
mailbox.
This feature is available only for PTs.