Panasonic KX-TA1232, Programming Manual

Page: 26 / 216

General Programming
26 Programming Guide
[004] Extension Name Set
Description
Assigns names to the extension numbers programmed in program [003] Extension Number
Set.
Selection
• Jack number: 01 through 32
• Name: 10 characters (max.)
Default
All jacks — Not stored
Programming
1.
Enter 004.
Display: 004 EXT NAME SET
2.
Press NEXT.
Display: Jack NO?
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display: #01:Not Stored
4.
Enter a name.
For entering characters, see Section 1.4 Entering Characters.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new name.
5.
Press STORE.
6.
To program another jack, press NEXT or PREV, or SELECT and the desired jack
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• There is a maximum of 32 names. Each name has a maximum of 10 characters.
• Program [003] Extension Number Set is used to assign extension numbers.
Features Guide References
Display, Call Information
Intercom Calling
pg.book 26 ページ ２００１年７月３日 火曜日 午後２時４４分