Panasonic KX-TA1232, Features Manual, Page: 43 / 224

General Features
Features Guide 43
Call Forwarding — to Outside Line
Description
Calls directed to your extension will be sent to an external destination. The outside telephone
number must be pre-programmed.
Conditions
• Types of calls which are forwarded by this function are:
Outside calls – Direct In Lines (DIL) 1:1;
Direct Inward System Access (DISA)
Intercom calls – Extension; Transfer
• The forwarding extension's Toll Restriction and Account Code Entry requirements still
apply.
• Although calls are forwarded, Message Waiting is not. The MESSAGE button indicator is
lit on the originally called extension.
• If an extension in Call Forwarding is also in a Hunt group a call directed to the extension is
forwarded. Station Hunting still applies for calls directed to other extensions in the Hunt
group.
• Both the Call Forwarding and Do Not Disturb (DND) functions can be set at the same time,
but cannot work at the same time.
• Pressing the FWD/DND button while on-hook allows the user to enable or disable the Call
Forwarding or DND function. If the user sets both functions, alternating the mode is also
available by pressing the FWD/DND button.
• Class of Service programming determines the extensions that are able to perform this
function.
• If an extension is limited by the program "[502] Extension-to-Outside Line Call Duration
Limit" according to its Class of Service, the extension is unable to forward an outside call
to an outside line.
• If a call between an extension and an outside party is established by this feature, the
duration of the call period can be restricted depending on the setting of the system timer. If
a call between two outside parties is established by this feature, the duration of the call is
determined by another system timer. An alarm tone is generated to both outside parties 15
seconds before the time-out. The call is disconnected at the time-out.