Panasonic KX-TA1232 Features Manual Download Page 19

Page: 19 / 224

General Features

Features Guide

Background Music (BGM)

Description

Allows the proprietary telephone user to listen to background music from the monitor speaker
on the telephone.

Conditions

•

It may be required to connect a user-supplied external music source, such as a radio. Up to
two sources can be connected.

•

It is required to select a music source used for BGM by System Programming.

•

The music source is used for BGM and/or Music on Hold. It is also possible to disable the
BGM and/or Music on Hold.

•

The music is interrupted when you go off-hook.

Connection References

•

2.3.6 External Music Source Connection

Programming Guide References

•

[803] Music Source Use

•

[990] System Additional Information

Features Guide References

•

Music on Hold

User Manual References

•

4.3.6 Background Music (BGM) [PT only]

Summary of Contents for KX-TA1232

































































































































































































































Search results

Summary of Contents for KX-TA1232

Reviews:

Panasonic KX-TA1232, Features Manual, Page: 19 / 224

Search results

Summary of Contents for KX-TA1232

Reviews: