background image

General Features

Features Guide

177

Station Hunting

Description

If a called extension is busy, Station Hunting redirects the incoming call to an idle member of 
the extension group. Idle extensions are automatically searched according to the programmed 
type. Five hunting types are available as follows:

Circular hunting:

The extensions are searched until an idle one is found, regardless of the jack number.

Termination hunting:

The extensions are searched until reaching the extension which has the highest jack number 
in the group.

Voice Mail (VM) hunting:

All the VM ports are searched until an idle one is found to permit VM Service.

Automated Attendant (AA) hunting:

All the AA ports are searched until an idle one is found to permit AA Service.

Ring Group hunting: 

All the extensions in the ring group ring simultaneously.

One of the hunting types is selected for each extension group.
To leave the hunting group temporarily, use the Log-Out function.
To re-join, use the Log-In function.

Conditions

If all the searched extensions are busy, a busy tone is sent to the caller.

If the called extension has set Do Not Disturb, Call Forwarding or Log-Out, Station Hunting 
skips the extension.

Programming Guide References

[106] Station Hunting Type

[602] Extension Group Assignment

Features Guide References

Extension Group

Log-In / Log-Out

Ring Group

Voice Mail Integration

User Manual References

Not applicable.

Summary of Contents for KX-TA1232

































































































































































































































Reviews: