Panasonic KX-T7735E Quick Reference Manual Download Page 1

Quick Reference Guide

Model No.  

KX-T7735E

Important Information

Proprietary Telephone  

Thank you for purchasing the Panasonic Proprietary Telephone, KX-T7735E.

When using the KX-T7735E, keep the following conditions in mind.

If you are having problems making calls, unplug the extension line and connect a known working telephone. 
If the known working telephone operates properly, have the defective telephone repaired by an authorised 
Panasonic Factory Service Centre. If the known working telephone does not operate properly, check the 

   KX-TE or KX-TDA series and the extension wiring.

Keep the unit away from heating appliances and devices that generate electrical noise, such as fluorescent 
lamps, motors and televisions. These noise sources can interfere with the performance of the unit. 
This unit should be kept free of dust, moisture, high temperature (more than 40 

o

C) and vibration, 

   and should not be exposed to direct sunlight.

The apparatus is designed to be installed and operated under controlled conditions of ambient temperature 
and a relative humidity not greater than 60 %. 
Avoid installing the unit in damp or humid environments, such as bathrooms or swimming pools.
Wipe the unit with a soft cloth. Do not clean the unit with abrasive powders or with chemical agents such as 
benzene or thinner.

   Use only the correct Panasonic handset.

Do not disassemble this product. Dangerous electrical shock could result. The unit must only be  
disassembled and repaired by qualified service technicians.
When a failure occurs which exposes any internal parts, disconnect the telephone line cord immediately and 
return the unit to a service centre.
Never attempt to insert wires, pins, etc, into the vents or other holes of this unit.
999 and 112 can be   on the apparatus after accessing the CO line for the purpose of making outgoing calls 
to the BT emergency (999) and (112) services.
This apparatus is capable of being used in conjunction with hearing aids fitted with inductive coil 
pick-ups. The handset should be held as for normal conversation. For operation the hearing aid 
should be set to its "T" position or as directed in the operating instructions for the hearing aid.

WARNING:

TO PREVENT POSSIBLE FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR 
MOISTURE. 

THIS HANDSET EARPIECE IS MAGNETISED AND MAY RETAIN SMALL FERROUS OBJECTS.

IMPORTANT NOTICE:

Under power failure conditions, this telephone may not operate. Please ensure that a separate telephone, 
not dependent on local power, is available for emergency use in emergencies.

Notes: 

In this manual, the suffix of each model number is omitted.
For further information, refer to the Main Unit/PABX Manuals.

Summary of Contents for KX-T7735E













Reviews: