Panasonic KX-PS8100 Operating Instructions Manual Download Page 185

Page: 185 / 305

185

Color Calibration

To reset color adjustment:

From Ready or Ready(Sleep), press the MENU button
and then press the

▲

/CONTINUE button repeatedly to

advance to the Color Adjustment screen.

Press the ENTER button twice.

The Brightness menu appears.

Press the ENTER button twice.

The Adjust Color menu appears.

Use the

⁄

/CANCEL button or the

▲

/CONTINUE button

to select Reset All, and press the ENTER button.

Use the

⁄

/CANCEL button or the

▲

/CONTINUE button

to select Yes, and press ENTER button twice.

The Color Test menu appears.

Press the ENTER button.

Color Adjust Test pages that use the previous value and the new
values are printed.

Press the ENTER button.

The Apply Changes menu appears.

Use the

⁄

/CANCEL button or the

▲

/CONTINUE button

to select Yes, and press the ENTER button.

The Ready menu appears.

Resetting the
color
adjustment

Summary of Contents for KX-PS8100


















































































































































































































































































































Search results

Summary of Contents for KX-PS8100

Reviews:

Related manuals for KX-PS8100

Brands by name

Popular brands

Panasonic KX-PS8100, Operating Instructions Manual

Search results

Summary of Contents for KX-PS8100

Reviews:

Related manuals for KX-PS8100

Brands by name

Popular brands