Note:
R
2 minutes after the monitored handset
starts a call, communication between the
monitored handset and monitoring
phone line is turned off automatically.
Other programming
Changing the handset name
The handset can be given a customised name
(“Bob”, “Kitchen”, etc.). You can also select
whether or not the handset name is displayed
in standby mode. The default setting is
“
No
”
.
If you select
“
Yes
”
without entering any
handset name,
“
Handset 1
”
is displayed.
1
M
Menu
N
(right soft key)
#104
2
Enter the desired name (max. 10
characters).
3
M
OK
N
4
MbN
: Select the desired setting.
a
M
OK
N
2 times
a
M
N
Storing an area code to be
deleted automatically
In some situations, phone numbers stored
automatically in the caller list (page 34) will
include area codes. If you do not want to dial
the area code when making calls from the
caller list, you can store the area code which
you want the unit to delete automatically.
Example:
You have stored the area code
“123”. If you make a call from the caller list to
the phone number “123-456-7890”, the unit
dials “456-7890”.
1
M
Menu
N
(right soft key)
#255
2
Enter an area code (5 digits max.).
a
M
OK
Na
M
N
Call restriction
You can restrict the handset or your
smartphone from dialling certain numbers.
You can assign up to 6 phone numbers to be
restricted, and select which handset or your
smartphone are to be restricted. Storing area
codes here prevents the handset from dialling
any phone number in that area code.
1
M
Menu
N
(right soft key)
#256
2
Enter the base unit PIN (default:
“
0000
”
).
R
If you forget your PIN, contact an
authorised service centre.
3
MbN
: Select the desired units to be
restricted.
a
M N
R
“ ” is displayed next to the selected
numbers.
R
To cancel, select the desired units.
a
M N
. “ ” disappears.
4
M
OK
N
5
Select a memory location by pressing
1
to
6
.
a
M
OK
N
6
Enter the phone number or area code to
be restricted (8 digits max.).
a
M
OK
N
a
M
N
Changing the base unit PIN
Important:
R
If you change the PIN (Personal
Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, contact
an authorised service centre.
1
M
Menu
N
(right soft key)
#132
2
Enter the current 4-digit base unit PIN
(default:
“
0000
”
).
3
Enter the new 4-digit base unit PIN.
a
M
OK
N
4
MbN
:
“
Yes
”
a
M
OK
N
a
M
N
Calendar/Schedule
You can program 20 schedule alarms using
the calendar. A schedule alarm sounds at the
set time for 1 minute. A text memo can also be
displayed for the schedule alarm.
Important:
R
Make sure the unit’s date and time setting
is correct (page 12).
31
Programming
PRW110BX_UE_(en-en)_1120_ver043.pdf 31
11/20/2013 1:50:57 PM
