n
When monitoring from an outside line:
To answer a call, follow the operation for
your phone.
If you want to respond from the monitoring
handset, press
#1
using tone dialing.
You can turn off the baby monitor feature
by pressing
#0
.
Note:
R
2 minutes after the monitored handset
starts a call, communication between the
monitored handset and monitoring
phone line is turned off automatically.
Other programming
Changing the handset name
Each handset can be given a customized
name (“Bob”, “Kitchen”, etc.). This is useful
when you make intercom calls between
handsets. You can also select whether or not
the handset name is displayed in standby
mode. The default setting is
“
No
”
. If you select
“
Yes
”
without entering any handset name,
“
Handset 1
”
to
“
Handset 6
”
is displayed.
1
M
Menu
N
(right soft key)
#104
2
Enter the desired name (max. 10
characters).
3
M
Save
N
4
MbN
: Select the desired setting.
a
M
Select
N
2 times
a
M
OFF
N
Calendar/Schedule
You can program 20 schedule alarms for each
handset using the calendar. A schedule alarm
sounds at the set time for 1 minute. A text
memo can also be displayed for the schedule
alarm.
Important:
R
Make sure the unit’s date and time setting
is correct (page 11).
Adding a new entry
1
M
Menu
N
(right soft key)
a
a
M
Select
N
2
MbN
: Select the desired date.
a
M
Select
N
3
M
Menu
N
a
MbN
:
“
Add new entry
”
a
M
Select
N
4
Edit the date if necessary.
a
M
OK
N
5
Set the desired time.
a
M
OK
N
6
Enter a text memo (30 characters max.;
page 16).
a
M
OK
N
7
MbN
: Select the desired alarm tone.
a
M
Select
N
2 times
R
You can select
“
Off
”
if you prefer not
to hear an alarm tone.
R
We recommend selecting a different
ringer tone from the one used for
outside calls.
8
M
OFF
N
Note:
R
To stop the alarm, press
M
Stop
N
or place
the handset on the base unit or charger.
R
When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
Viewing entries
1
M
Menu
N
(right soft key)
a
a
M
Select
N
2
To see the entries on the selected date,
press
M
Select
N
.
To see the schedule list, press
M
List
N
.
R
You can see detailed information
about the schedule by pressing
M
Menu
N
.
a
MbN
:
“
Detail
”
a
M
Select
N
Editing an entry
1
M
Menu
N
(right soft key)
a
a
M
Select
N
2
M
List
N
a
MbN
: Select the desired entry.
3
M
Menu
N
a
MbN
:
“
Edit
”
a
M
Select
N
4
Edit the date if necessary.
a
M
OK
N
5
Edit the time if necessary.
a
M
OK
N
30
Programming
PRS120C(en)_0121_ver110.pdf 30
2014/01/29 14:56:58
