Control Panel Software
Program
This software is used to change the configuration of the
printer. Using this software, you can also print out the
printer's character table.
It is necessary to install the printer driver to use this
software.
When using the Windows driver, these settings are
rarely used.
When using the Windows driver, make sure Emulation
is set to "EPSON".
The printer is compatible with most popular software
packages. If no changes are required, you should be
ready to print. In most cases there will be no need to
change the initial setup items.
To start the Control Panel Software program, from
[Start], select [All programs]
®
[Panasonic]
®
[Panasonic KX-P1121E]
®
[Control Panel Software].
You can change the following items:
Emulation
EPSON (Epson LQ-850)
IBM (IBM Proprinter X24E)
Character set
Italic (Epson only)
Graphic 1
Graphic 2
Code page
USA (PC-437)
Multilingual (PC-850)
Portugal (PC-860)
Canada-French (PC-863)
Norway (PC-865)
Turkey (PC-857)
International character
USA, France, Germany, UK, Denmark1, Sweden,
Italy, Spain1, Japan, Norway, Denmark2, Spain2,
Latin America, Korea, Legal
Font
Draft, Courier, Prestige, Bold PS
Pitch
10 CPI, 12 CPI, 15 CPI, 17 CPI, 20 CPI, P.S
Zero font
Normal (0)
Slashed (
0
)
Page length
11 Inch, 12 Inch, 14 Inch, 11
2
/
3
Inch, 8 Inch,
8
1
/
2
Inch, 5
1
/
2
Inch
Auto LF
On (CR+LF)
Off (CR only)
Auto CR (IBM only)
On (LF, VT, ESC+"J" +CR)
Off (LF, VT, ESC+"J" only)
Skip perforation
On (1 inch skip)
Off (No skip)
A.G.M (Alternate Graphic Mode) (IBM only)
On, Off
Graphic direction
Uni Direction, Bi Direction
Download buffer
Enable, Disable
Auto load
On (Available)
Off (Not available)
Auto Online
On (Available)
Off (Not available)
TOF set (# / 72 inch)
Tractor:
0–360
Friction:
0–360
Note
•
The following items can also be set through the
Control Panel (Page 27):
Emulation, Page length, Auto LF, Graphic
direction and Download buffer
Operating Instructions
25
Using the Software
Using the Software
