Single Sheets and Envelopes
(Friction Mode)
1.
A
Turn the power on.
The PAPER OUT indicator will flash indicating that
no paper is installed in the printer.
B
Adjust the head gap lever (
A
) for the
thickness of paper you are using.
Position
Used for
1 or 2
Thinner sheets
3, 4, 5 and 6
Thick sheets or envelopes
1
2
3
4
5
6
A
B
A
2.
Set the paper feed selector (
A
) to the " "
position.
A
3.
Raise the top cover (
A
) to single sheet feed
position.
This is done by inserting the side pins of the top
cover into the slots in the upper cabinet.
A
4.
Raise the paper support (
A
).
A
5.
Insert a sheet of paper with the printed side face
down behind the platen by aligning its left edge
with
0
on the top cover.
Operating Instructions
23
Setup
