Add media
Click Add media to open the media setting window. You can specify the type of media that will be sent when
a trigger is activated. A total of 5 media settings can be configured. There are three choices of media types
available: Snapshot, Video clip, and System log. Select the item to display the detailed configuration options.
You can configure either one or all of them.
Media type - Snapshot
Select to send snapshots when a trigger is activated.
•
Media name:
Enter a name for the media setting.
•
Source:
Select to take snapshots from stream 1-2.
•
Send pre-event images:
The KX-NTV150/KX-NTV160 has a buffer area; it temporarily holds data up to
a certain limit. Enter a number to decide how many images to capture before a trigger is activated. Up to
7 images can be generated.
•
Send post-event images:
Enter a number to decide how many images to capture after a trigger is
activated. Up to 7 images can be generated.
For example, if both the Send pre-event images and Send post-event images are set to 7, a total of 15
images are generated after a trigger is activated.
1 pic.
2 pic.
3 pic.
4 pic.
5 pic.
6 pic.
7 pic.
8 pic.
9 pic.
10 pic.
11 pic. 12 pic. 13 pic.
14 pic. 15 pic.
Trigger Activation
•
File name prefix:
Enter the text that will be appended to the front of the file name.
•
Add date and time suffix to file name:
Select this option to add a date/time suffix to the file name.
For example:
Snapshot_
20101213_100341
File name prefix
Date and time suffix
The format is: YYYYMMDD_HHMMSS
112
User’s Manual
2 Software
