Server type - HTTP
Select to send the media files to an HTTP server when a trigger is activated.
•
Server name:
Enter a name for the server setting.
•
URL:
Enter the URL of the HTTP server.
•
User name:
Enter the user name if necessary.
•
Password:
Enter the password if necessary.
To verify if the HTTP settings are correctly configured, click Test. The result will be shown in a pop-up window.
If successful, you will receive a test.txt file on the HTTP server.
Click Save server to enable the settings.
Server type - Network storage:
Select to send the media files to a network storage location when a trigger is activated. Please refer to NAS
server on page 125 for details.
Server type - SIP Outgoing
Select to make SIP outgoing to the number set in SIP
®
General settings.
Click Save server to enable the settings.
User’s Manual
111
2 Software
