Panasonic KX-NSX2000 Operating Manual Download Page 74

Page: 74 / 316

To disconnect one party and then talk to the other in a three-party conversation

PT/PS

Press

TRANSFER

once

or twice to establish a
conversation with the
party to be disconnected.

During a conversation

Press

FLASH/RECALL

Press the flashing

ICD Group

PDN

SDN

, or

INTERCOM

corresponding to the party on hold.

Talk.

The other party will be put on hold.

(CO)

(ICD Group)

(SDN)

(PDN)

•

* In this case, the FLASH/RECALL button on a proprietary telephone must be set to Flash/
Recall mode through system programming.

•

During a three-party conversation, pressing the TRANSFER button or Recall/hookswitch
alternates between the other parties in the conversation.

•

You can have a conference with a maximum of eight parties (comprising intercom or outside
lines) simultaneously.

•

During a conversation involving four or more parties, you cannot disconnect one party and
maintain the conversation with the other parties.

•

SIP phone users cannot originate a conference call, but can be added as a member.

Customising Your Phone

•

3.1.3 Customising the Buttons
Create or edit a Conference button.

Leaving a Conference (Unattended Conference)

The person who originated a conference can leave the conference, and allow the
other parties to continue the conversation.

To leave a conference

PT/PS

Press

CONF

During 3- to 7-party conference

On-hook.

1.4.5 Multiple Party Conversation

Operating Manual

Summary of Contents for KX-NSX2000





























































































































































































































































































































Search results

Summary of Contents for KX-NSX2000

Reviews:

Related manuals for KX-NSX2000

Brands by name

Popular brands

Panasonic KX-NSX2000, Operating Manual

Search results

Summary of Contents for KX-NSX2000

Reviews:

Related manuals for KX-NSX2000

Brands by name

Popular brands