Panasonic KX-NSX2000 Operating Manual Download

Page: 236 / 316

Automatic log-in

PT/SLT/PS/SIP Extn.

Enter

Message Manager password

and

Message Manager password

Off-hook.

Press

MESSAGE

Voice Mail

Transfer

, or

enter

UM group’s

floating extension number

UM group’s floating

extension no.

(Voice Mail

Transfer)

Enter Message Manager’s
Mailbox

•

This feature may be disabled by the System Administrator for your mailbox.

Remote automatic log-in

Enter

Message Manager

password

and

Message Manager password

From Outside Telephone

Call the Unified Messaging system
from the preprogrammed
outside telephone number
(assigned as a Caller ID number).

Enter Message Manager’s
Mailbox

CAUTION

•

It is strongly recommended that a password of 16 numbers be used for maximum
protection against unauthorised access.

•

To avoid unauthorised access to the PBX, keep the password secret. If it becomes
known to others, the PBX may be misused.

•

Change the password periodically.

Notice

•

When disabling the password requirement, ensure that an unauthorised third-party is
not allowed access to your extension.

Managing the General Delivery Mailbox

One of the Message Manager’s functions is to check the General Delivery Mailbox for messages and
transfer them to the appropriate mailbox or mailboxes (Mailbox Groups may be used). This can be done at
any time using the telephone.

2.2.2 Message Manager Features

236

Operating Manual

Summary of Contents for KX-NSX2000





























































































































































































































































































































Search results

Summary of Contents for KX-NSX2000

Reviews:

Related manuals for KX-NSX2000

Brands by name

Popular brands

Panasonic KX-NSX2000, Operating Manual

Search results

Summary of Contents for KX-NSX2000

Reviews:

Related manuals for KX-NSX2000

Brands by name

Popular brands