manualshive.com logo in svg

Panasonic KX-NSX1000, Manual

Share
Download
Panasonic KX-NSX1000 Manual Download Page 202

Operating Manual References

1.14.4 Self Labelling (KX-NT366/KX-NT553/KX-NT556/KX-NT560 only)
3.1.3 Customising the Buttons

2.21.3  LED Indication

Description

The LED (Light Emitting Diode) of the Message/Ringer Lamp and following buttons (Line Status Buttons and
Corresponding Extension Status Button) show line conditions with a variety of light patterns.

Line Status Buttons:

 S-CO, G-CO, L-CO, INTERCOM, ICD Group, PDN

Corresponding Extension Status Button:

 DSS, SDN

1.

Light Pattern of the Message/Ringer Lamp
[IP-PT and DPT]

•

Incoming call from a trunk: Red flashing

•

Incoming call from another extension: Green flashing

•

Message(s) present (no incoming call): Red on

•

No message(s) present (no incoming call): Off

[APT]

•

Incoming call: Red flashing

•

Message(s) present (no incoming call): Red on

•

No message(s) present (no incoming call): Off

2.

Light Pattern of the Line Status Buttons

Light

Pattern

Line Status Button

Trunk Status

Intercom

Line Status

Incoming

Call

Distribution

Group Line

Status

S-CO

G-CO

L-CO

INTERCOM

ICD Group

Off

Idle

Green on

This extension is using the line.

Slow green
flashing

This extension is holding the line.

Moderate
green
flashing

This extension is holding the line using Exclusive Hold or using the line for an

Unattended Conference.

Rapid green
flashing

Incoming call/
Privacy
Release

Incoming call

2.21.3 LED Indication

202

Feature Manual

Summary of Contents for KX-NSX1000









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands