manualshive.com logo in svg

Panasonic KX-NS700, Feature Manual

Share
Download
Panasonic KX-NS700 Feature Manual Download Page 188

2.12  Transferring Features

2.12.1  Call Transfer

Description

An extension user can transfer a call to another extension or an outside party. The following features are
available:

Feature

Transferring method

With Announcement

Transfer is completed after announcing the destination party.

Without Announcement

Transfer is completed without an announcement.
After dialling the destination, while hearing a ringback tone, the
originator can replace the handset.

Call Transfer with Announcement is also known as Call Transfer—Screened.
Call Transfer without Announcement is also known as Call Transfer—Unscreened.

188

Feature Manual

2.12.1 Call Transfer

Summary of Contents for KX-NS700





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands