Panasonic KX-NS500, Pc Programming Manual

Page: 857 / 1064

Value Range
Max. 16 digits
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Mailbox Parameters
PC Programming Manual References
26.1 UM Configuration—[7] System Security—Subscriber
Feature Guide References
3.1.2.4 Password Administration
Mailbox Password (Message Client)
Specifies the password needed to access the mailbox when using a client software programme. If a default
password is programmed by an administrator, that password will be assigned automatically when creating all
mailboxes. Administrators can change and delete the password.
Note
This setting requires the installation of an Activation Key for Unified Messaging E-mail Notification
(KX-NSU2xx) for the number of users that will be accessing their UM mailbox using a client software
programme.
To change a password for a mailbox:
1.
On the Mailbox Parameters Screen, click Edit under Mailbox Password (Message Client) for the mailbox
extension to change.
2.
In the window that appears, enter the new password and then enter it again to confirm it.
3.
Click OK .
Value Range
4–16 characters (A–Z, a–z, 0–9)
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Mailbox Parameters
PC Programming Manual References
26.1 UM Configuration—[7] System Security—Subscriber
Feature Guide References
3.1.2.4 Password Administration
Class of Service (Mailbox)
Determines the set of services available to the subscriber.
PC Programming Manual 857
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting