Panasonic KX-NS500, Pc Programming Manual

Page: 115 / 1064

7.4.2 Utility—Monitor/Trace—V-IPGW Protocol Trace
This utility collects trace data of protocol activity from V-IPGW16 card.
This option is only available at Installer level in On-line mode, and requires that the target V-IPGW16 card be
set to INS status.
To save trace data to the System Memory
1.
From the Utility menu, select V-IPGW Protocol Trace .
When the progress bar disappears, the protocol trace is complete. The trace data has been saved to the
System Memory (file name: "PRTH323").
To transfer trace data to the PC
1.
Click the File Transfer PBX to PC link to access the file transfer screen.
The list of files will be displayed.
Note
The file transfer screen can also be accessed from the tree menu (see 7.2.2 Utility—File—File
Transfer PBX to PC ).
2.
Select the desired trace data file.
3.
Click Transfer .
4.
Navigate to the folder in which you want to save the file.
5.
Enter a file name.
6.
Click Save .
7.
Click OK .
PC Programming Manual 115
7.4.2 Utility—Monitor/Trace—V-IPGW Protocol Trace