manualshive.com logo in svg

Panasonic KX-NS500, Features Manual

Share
Download
Panasonic KX-NS500 Features Manual Download Page 320

2.30  Miscellaneous Features

2.30.1  Background Music (BGM)

Description

A PT user can listen to BGM through the built-in speaker while on-hook and idle. The following audio sources
are available for BGM:

•

External Music Source

•

Internal Music Source

BGM—External:

BGM can also be broadcast in the office through the external pagers, this can be turned on and off by an
extension assigned as the manager.

Conditions

[BGM]

•

Hardware requirement:

 User-supplied music source (when an external music source is assigned)

•

The music through the PT is interrupted when going off-hook.

•

Each user can set/cancel BGM, and also select the music source.

•

Through system programming, it is possible to specify the maximum number of IP-PTs that can
simultaneously perform the BGM feature. Changing this setting may affect the number of simultaneous IP
extension and IP trunk calls available on the mother board.

[BGM—External]

•

Hardware requirement:

 A user-supplied external pager

•

External pagers can be used with the following priorities:
TAFAS 

®

 Paging 

®

 BGM

(

®

 2.17.1  Paging, 2.17.2  Trunk Answer From Any Station (TAFAS))

Installation Manual References

4.10  Connection of Peripherals

PC Programming Manual References

9.2.2  PBX Configuration—[1-1] Configuration—Slot—System Property—Site—VoIP-DSP Options—

IP

Extension Count of BGM
10.2  PBX Configuration—[2-2] System—Operator & BGM
10.6.1  PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features

→

External BGM On / Off

→

BGM Set / Cancel

10.11.1  PBX Configuration—[2-11-1] System—Audio Gain—Paging/MOH

→

Internal MOH—MOH1-2 (Music On Hold 1-2)

13.2  PBX Configuration—[5-2] Optional Device—External Pager

User Manual References

1.9.8  Turning on the Background Music (BGM)

320

Feature Guide

2.30.1 Background Music (BGM)

Summary of Contents for KX-NS500





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands