![background image](http://html1.mh-extra.com/html/panasonic/kx-ns500/kx-ns500_features-manual_3554256290.webp)
2.24.4 Timed Reminder
Description
An extension can be preset to ring at a certain time, to act as a wake-up call or reminder. This feature can be
programmed to activate only once, or daily. If the user answers the alarm call, a prerecorded voice message
will be heard. If a message is not assigned, a special dial tone (dial tone 3) will be heard.
Timed reminders can be set in one of two ways:
•
By the extension user, from his own extension.
•
Remotely, by the hotel operator (Remote Wake-up Call)
Conditions
•
Be sure that the PBX clock works.
•
Only one timed reminder can be set for an extension at a time. Setting a new reminder clears the previous
reminder. If both the extension user and the hotel operator set a timed reminder for the same extension,
the timed reminder that was set most recently is effective.
•
Programmable Time
The Alarm Ringing Duration time, the number of alarm repeat times, and intervals are programmable
through system programming.
•
To use the voice message feature:
An extension assigned as the manager can record messages (
®
2.30.2 Outgoing Message (OGM)). A
different message can be assigned for each time mode (day/lunch/break/night) (
®
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—DISA / Door / Reminder / U. Conf
→
→
Timed Reminder—Interval Time (x10s)
→
Timed Reminder—Alarm Ringing Duration (x10s)
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features
→
Remote Timed Reminder (Remote Wakeup Call)
→
10.8.3 PBX Configuration—[2-8-3] System—Ring Tone Patterns—Call from Others—
Reminder—Ring Tone Pattern Plan 1–8
10.9 PBX Configuration—[2-9] System—System Options—Option 1—
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System—Option 2—
Reminder Message—Day, Lunch, Break, Night
14.2 PBX Configuration—[6-2] Feature—Hotel & Charge—Main—
SMDR for External Hotel Application
1—Timed Reminder (Wake-up Call)
19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR—
Print Information—Timed Reminder
Feature Guide References
User Manual References
290
Feature Guide
2.24.4 Timed Reminder
Summary of Contents for KX-NS500
